9
Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036
Web Support : www.quesh.co.uk
Model Number: 48451 9
1. Signal strength. The slide bar indicates how strong the
received signals are, the stronger the signal, the longer the bar
will be from left to right.
SHOWS THE SIGNAL STRENGTH
If the signal level drops below the fth box (minimum signal level) then
you may experience problems with the quality of the audio.
Note: This signal strength is only for indicating DAB stations strength.
2. Advanced display modes
3. Auto scan modes
There are two types of auto scan, LOC (LOCAL) scan and the other is FULL
scan. LOC scan searches the local DAB bands III in your area and FULL scan
searches all UK band III DAB channels.
To activate the LOC scan press the ”Auto scan” button and for FULL scan
press and hold the ”Auto scan” button.
4. Manual tune
As well as an auto tune function, you can manually tune the receiver.
This can help you when aligning your aerial or when adding stations
that were missed while auto tuning.
Press the ”Info” button and turn the ”Tune/Select” key to move the
menu, when the LCD display shows ”manual”. Then press the ”Tune/
Select” key to enter into manual tune mode. Now turn the “Tune/
Select” button to move through the DAB channels, which are
numbered from 5A to 13F.
To Next Page
Loading...
