Need help?Do you have a question about the Tevo Black Widow and is the answer not in the manual?
General| Build Volume | 300 x 300 x 400 mm |
|---|---|
| Print Technology | FDM (Fused Deposition Modeling) |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
| Heated Bed | Yes |
| Bed Temperature | up to 100 °C |
| Nozzle Temperature | up to 260 °C |
| Extruder Type | Single |
| Frame Structure | Open |
| Power Supply | 24V |
| Layer Resolution | 0.1 - 0.4 mm |
| Print Speed | 20 - 100 mm/s |
| Supported Materials | PLA, ABS, PETG |
| Software | Cura, Repetier-Host |
To Next Page
