TEXA TMD MK3 MULTIREADER - 5.3 Installation

5.3 Installation
The additional Y-shaped cable (code 3904674) is needed for the installation.
Position the device in a way it does not compromise or interfere with
driving, but also easy to reach in case of an emergency.
1.
TMD MK3 EDR
2.
Y-shaped cable
3.
TMD MK3 PRIVACY
Proceed as follows:
1.
Secure TMD MK3 PRIVACY in the most appropriate position*.
2.
Connect the TMD MK3 PRIVACY cable to the Y-shaped cable.
3.
Insert the connector of the Y-shaped cable into the L1 input of TMD MK3 EDR.
(*) See the specific installation sheet for the vehicle you are working on.
18