7.5 Use
The device is highly configurable via firmware.
A specific function can be assigned to each button.
An example of configuration is the following:
•
keeping the SOS button pressed for an extended amount of time allows the
transmission of a request for assistance to the Operations Centre;
•
pressing the CALL button allows you to "hang up", ending the conversation with
the Operations Centre;
•
the buttons A-I and A-II allow you to, respectively, lower and raise the volume of
the speaker.
Both the RGB LED and the speaker can be used to give visual and audible
indications.
31
en
To Next Page
Loading...
