TEXA TMD MK3 MULTIREADER - Page 65

Below only the connections between TMD MK3 EDR, TMD I/O
EXPANDER and the related cables are indicated
See the specific installation sheet for the vehicle you are working
on for a complete and correct installation.
Proceed as follows:
1.
Secure TMD I/O EXPANDER in the most appropriate position.
2.
Insert the connector of the Y-shaped cable (code 3904674) into the L1 input of
TMD MK3 EDR.
3.
Insert the connector of the TMD I/O EXPANDER (code 3908285) into the
connector of the Y-shaped cable (code 3904674).
4.
Insert the connector of the TMD I/O EXPANDER (code 3908285) into the P4 input
of TMD I/O EXPANDER.
5.
Insert the connector of the actuator lock cable (code 3908244) into the P1 input of
TMD I/O EXPANDER.
6.
Insert the connector of the door opening / closing and TMD BLINKER cable (code
3908243) into the P3 input of TMD I/O EXPANDER.
7.
Insert the connector of the TMD BLINKER cable (code 3908243) into the
connector of the door opening / closing and TMD BLINKER cable (code
3908243).
65
en