2 Setting Up the Software
1. Download the TICS Pro from the TI Website at www.ti.com/tool/TICSPRO-SW and install.
2. From the menu bar choose Select Device → PLL + VCO → LMX2615
Figure 2-1. Search for LMX2615 on TICS Pro
3. Verify the communication setup with Reference Pro. To do this, select USB communications → Interface .
Click on the identify button and the LED on the Reference Pro should blink.
www.ti.com Setting Up the Software
SNAU218A – NOVEMBER 2018 – REVISED AUGUST 2022
Submit Document Feedback
LMX2615EVM-CVAL Wideband 15-GHz Synthesizer 3
Copyright © 2022 Texas Instruments Incorporated
To Next Page
Loading...
