Texas Instruments TI-30XS Multiview User Manual

Copyright © 2006 Texas Instruments Incorporated 14
The TI-30XS MultiView™ calculator defaults output to
improper fractions. Results are automatically simplified.
• q enters a simple fraction. Pressing q before or after a
number can result in different behavior. Entering a number
before pressing q makes that number the numerator.
To enter fractions with operators or radicals, press q
before you enter a number (in MathPrint™ mode only).
In MathPrint mode, press $ between the entry of the
numerator and the denominator.
In Classic mode, press q between the entry of the
numerator and the denominator.
• %N enters a mixed number. Press %N between
the entry of the unit and the numerator.
• % O converts between mixed numbers and simple
fraction form.
• % j converts results between fractions and
decimals.
Examples Classic mode
Examples MathPrint™ mode
n/d, U n/d 3 q 4 T 1 % N 7
q 12 <
n/d ¶U n/d 9 q 2 %O <
F ¶D 4 % N 1 q 2 %
j <
n/d, U n/d q3 $ 4 " T 1
%N 7 $12 <
n/d ¶Un/d 9 q 2 " %O
<

Texas Instruments TI-30XS Multiview Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Blue, Yellow
Digits	16 digits
Display type	LCD
Display tilting	No
Display number of lines	4 lines
Storage media type	-
Power source	Battery/Solar