34 Working with Documents on TI-Nspire™ Handhelds
3. Press £, ¤, ¡,or¢ to move the divider to adjust the height or width
of the panes in the layout.
4. Press
+ or - to select a defined layout:
• Pressing
- returns to a full page layout.
• Pressing
+ once switches layout from a vertical layout to a
horizontal layout. Press
- to go back to a vertical layout.
• Pressing
+ twice adds a third pane to the page. Pressing +
multiple times enables you to choose between a vertical and
horizontal page layout with three panes.
• Pressing + five times adds a fourth pane to the page. Press - to
cycle through the previous layout options.
5. Press
x or · to accept the layout dimensions.
6. Press
/e to move between panes. Bold lines around the pane
indicate that the pane is active.
Swapping Applications on a Page
If you want to change the position of applications on a page with
multiple applications, you can do so by “swapping“ the positions of two
applications.
1. Press
~5 Page Layout 4 Swap Application.
The selected application is surrounded by a heavy, flashing black
border, and the Swap App cursor
é is displayed on the screen.
Note: On a two-pane page layout, the selected application
automatically swaps position with the opposite pane. Press
x
or
· to complete the swap.
To Next Page
General
