Flash
Description:
Enables the indicated flash controller interrupt sources. Only the sources that are enabled can
be reflected to the processor interrupt; disabled sources have no effect on the processor.
Returns:
None.
8.2.1.5 ROM_FlashIntStatus
Gets the current interrupt status.
Prototype:
uint32_t
ROM_FlashIntStatus(bool bMasked)
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_FLASHTABLE is an array of pointers located at ROM_APITABLE[7].
ROM_FlashIntStatus is a function pointer located at ROM_FLASHTABLE[12].
Parameters:
bMasked is false if the raw interrupt status is required and true if the masked interrupt status
is required.
Description:
This returns the interrupt status for the flash controller. Either the raw interrupt status or the
status of interrupts that are allowed to reflect to the processor can be returned.
Returns:
The current interrupt status, enumerated as a bit field of FLASH_INT_PROGRAM and
FLASH_INT_ACCESS.
8.2.1.6 ROM_FlashProgram
Programs flash.
Prototype:
int32_t
ROM_FlashProgram(uint32_t
*
pui32Data,
uint32_t ui32Address,
uint32_t ui32Count)
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_FLASHTABLE is an array of pointers located at ROM_APITABLE[7].
ROM_FlashProgram is a function pointer located at ROM_FLASHTABLE[0].
Parameters:
pui32Data is a pointer to the data to be programmed.
ui32Address is the starting address in flash to be programmed. Must be a multiple of four.
ui32Count is the number of bytes to be programmed. Must be a multiple of four.
76 April 8, 2013
To Next Page
Loading...
Need help?
General
