Texecom Premier Elite 24

Ricochet MT2 Addendum
6 ADD068
Premier Elite SmartKey™
Introduction
Premier Elite SmartKey™ are now learnt and all functionality managed through the “Setup Users” Menu.
Ricochet™ MT2 and Premier Elite Series V2 firmware upgrades add additional capabilities to the management of Premier Elite
SmartKey™. In multiple expander systems it is now possible to choose which zones (and therefore expander) the Premier Elite
SmartKey™ will use for its routeing, LED and Aux functions can also be changed within the “Setup Users” menu.
All users on the system can have a Premier Elite SmartKey™ a TAG and a code, or any combination of them.
This addendum only deals with Premier Elite SmartKey™ learning and routeing, all other user programmable options can be found in
INS176-8 Premier Elite Series Installation Manual or later.
 Great care should be taken when using large numbers of Premier Elite SmartKey™, only one Premier Elite SmartKey™ per
expander can be used by the system at any one time, and on Multiple expanders systems, or large sites, functionality should be
checked in all areas of the site where the device may be used.
Premier Elite SmartKey™ Routeing
Premier Elite SmartKey™ should only be learned to the system AFTER all devices have been learned and placed in their final location.
Whilst it is possible to learn at any point during the programming of the system, learning and testing the functionality of the Premier
Elite SmartKey™ after all devices have been placed will ensure that the Premier Elite SmartKey™ performs as expected, and works in
locations where the user would expect it too.
Route By
The Route By function allows you to select which Zones (and therefore expander) the Premier Elite SmartKey™ will use on the system
for its routeing. This should be selected BEFORE the device has been learned.
In the examples below Fig 1 shows the zones associated with Expander 1, which is a 32XP-W, and Fig 2 shows Expander 2 which is
also a 32XP-W, when using 8XP-W there willobviously be less devices that the Premier Elite SmartKey™ can use.
  
   
Fig 1
  
   
Fig 2
The  key is used to select this menu and the  key used to select which expander and associated zones will be used
Once a Premier Elite SmartKey™ has been learned the  key will show which zones are being used for routeing. It is not possible
to alter this once learned. To change the routeing the Premier Elite SmartKey™ should be deleted and the process started from the
beginning.
LED & Aux Functions
Please refer to INS467 for details of the LED & Aux functions.
Deleting a Premier Elite SmartKey™
Deleting the Premier Elite SmartKey™ from the user is a similar process to learning, at the appropriate point in the menu press 
followed by , the Premier Elite SmartKey™ will be removed from the User. To delete all user data see INS176-8 or later.
Please see the diagram on the next page which details the process used to choose routeing and learn Premier Elite SmartKey™ to
users.