Technical Support : 91520 10269 : indiatechsupport@texe.com
Press Menu ( ) two times on the control panel and then press Yes to logoff
from your control panel
Frequently Asked Questions:
1. What would be the maximum distance between the device and magnetic
contact?
Ans: The magnetic contact distance is
Press Yes 7times to reach zone mode(wiring) & make zone wiring as
“always awake”
2. How to convert third party wired sensors to wireless sensor?
Ans: Inside the device we have an option for converting the third party wired
sensors to wireless sensor by using MAG1 & COM or MAG2 & COM.
OR
Non-Ferrous
Mounting Material
Ferrous Mounting
Material
Maximum Break 30mm 15mm
Minimum Make 15mm 5mm
3. How to identify the status of sensor using LED?
Ans: Below are the details of the LED status.
Colour Status Description
Flashing Green With all contacts secure, will flash every 3
seconds.
Red Indicates either he reed switch or external
contact are active.
To Previous Page
Loading...
