Texecom Premier Elite Impaq Contact-W User Manual

Technical Support : 91520 10269  : indiatechsupport@texe.com
Press 1234 on the control panel. The below message will be displayed.
Press Yes
Press reset button
When it starts learning you need to insert the battery into the Impaq contact-W
Premier Elite Impaq Contact-W (GBB0003)
Press Yes till you reach zone type
Note: In this case
we’re learning
sensor in zone 105.
Press any free zone number (eg: 105) to learn your Impaq contact-W
Note: Before learning the
sensor we need to place
the jumper in relearn

Texecom Premier Elite Impaq Contact-W Specifications

General

Brand	Texecom
Model	Premier Elite Impaq Contact-W
Category	Security System
Language	English

Summary

Impaq Contact-W Installation and Learning

Control Panel Zone Setup Prompt

Displays the initial control panel message and selecting a zone for learning.

Learning the Impaq Contact-W Sensor

Steps to learn the Impaq contact-W sensor into a free zone, including relearn jumper.

Battery Insertion for Learning

Instructions for inserting the battery into the Impaq contact-W during the learning phase.

Zone Mode Configuration and FAQs

Setting Zone Mode to 'Always Awake'

Procedure to set the zone mode and wiring to 'Always Awake'.

Maximum Magnetic Contact Distance

Details the maximum break and make distances for non-ferrous and ferrous mounting.

Converting Wired Sensors to Wireless

Explains how to convert third-party wired sensors to wireless using MAG1/MAG2 terminals.

Interpreting Sensor LED Status

Provides a guide to understanding the LED color status indicators on the sensor.