Need help?Do you have a question about the Texecom Premier Elite Series and is the answer not in the manual?
General| Event Log | 1000 events |
|---|---|
| Expanders | Supports up to 8 expanders |
| Wired Zones | Up to 48 wired zones |
| Wireless Zones | Up to 64 wireless zones |
| Batteries | 12V 7Ah |
| Tamper Protection | Yes |
| Outputs | Up to 8 outputs |
| Battery Backup | Yes |
| Compatibility | Compatible with Texecom accessories |
| Dimensions | Varies depending on model |
| Weight | Varies depending on model |
Explains user codes, tags, SmartKeys for arming/disarming, and keypad usage.
Details of UK English and English key icons for system operations like Omit, Bypass, and Chime.
Explanation of system status indicated by Power, Service, Ready, and Info LEDs.
Describes SmartKey buttons for Power, Function (Arm, Disarm, Part Arm) and their LED indicators.
Instructions for triggering emergency alarms (Fire, Medical, Panic) using specific key combinations.
Enables system arming without a user code via 'Quick Arm' keys.
Details on locking and unlocking keypad keys to prevent unauthorized access.
Comprehensive guide to LED status meanings for Power, Service, Ready, Info, and Omit.
Handling zone faults and ensuring the Ready light is on before arming.
Steps to fully arm the alarm system with user codes and confirmation.
Procedure for partially arming the system by omitting specific zones.
How to arm specific areas of the system independently.
Steps to disarm the alarm system during entry or when not in entry mode.
Procedure to cancel the system's exit mode if not leaving the premises.
How to resolve Arm Fail conditions indicated by sounders and strobe.
Steps to silence internal and external sounders after an alarm event.
How to view and scroll through system alerts or fault messages.
Procedures for USER, ENGINEER, and ANTI-CODE resets after an alarm.
How to exclude specific zones from arming due to faults or necessity.
Turning the chime feature on and off for specific zones.
Steps to update the system's internal time and date settings.
How to access and review the system's event log.
Instructions for changing, adding, and deleting user codes for system access.
How to use proximity tags for arming, disarming, and system logging.
Steps to assign and program proximity tags to users.
Specific procedures for arming and disarming using proximity tags.
Summary of SmartKey operations for arming, disarming, and system functions.
To Next Page
