Need help?Do you have a question about the Texecom Premier Elite iProx and is the answer not in the manual?
General| Type | Proximity reader |
|---|---|
| Technology | Proximity |
| Frequency | 125kHz |
| Mounting | Surface mount |
| Compatibility | Texecom Premier Elite Series |
| Battery Life | N/A (Wired) |
Explains the network mode operation and features of the Premier Elite iProx module.
Details the stand-alone mode for the Premier Elite iProx, acting as a simple door access controller.
Introduces the network mode installation and panel compatibility for the iProx module.
Details the function of option and address switches for the iProx module in network mode.
Explains how to use standard Premier Elite proximity tags with the iProx module in network mode.
Guides on using third-party proximity tags with the iProx module via a Wiegand reader.
Describes how the iProx module operates when installed in Network Mode.
Explains the operational procedures when the iProx is integrated with the SA840-A20 keypad.
Introduces the stand-alone mode for the iProx, enabling its use as a single door access controller.
Explains the function of option and address switches for the iProx module when in stand-alone mode.
Guides on using standard Premier proximity tags with the iProx module in stand-alone mode.
Details how to use third-party proximity tags or cards with the iProx in stand-alone mode via Wiegand.
Describes the operational behavior of the iProx module when configured for stand-alone mode.
To Next Page