INS303-5 6/22
Volume adjustment for extension loudspeaker6.
Remote proximity coil and LED terminal connections for Premier External7.
Prox unit
Internal proximity coil8.
Request To Exit (RTE) input (apply 0V to activate)9.
Door strike relay (voltage free change-over contacts)10.
Address/User/Door Strike time selection switches11.
Option selection switches12.
Enable/disable internal sounder jumper link13.
Internal/External coil selection jumper links14.
3.0 Network Mode Installation
3.1 Introduction
When the iProx is used in the Network mode, it uses one of the available remote
keypad address slots on the system. The maximum number of keypad address
slots varies depending on the control panel:
Before installing the unit, make sure that you have a spare keypad address slot, if
all keypad slots have been used it will not be possible to install the iProx in this
mode.
To Next Page
Loading...
