Texecom Premier Elite Series User Manual

Premier Elite Series User Guide
8 INS555-5
SmartKey™ & Quick Guide
Operation
SmartKey™
Keypad
Action
 For all SmartKey™ operations the SmartKey™ should be powered on by pressing and holding
for 4 seconds
To Full Arm the System
Enter a valid User code

Press Yes (or press Chime to arm silently)

or

To Part Arm the System
Enter a valid User code

Press Part

Select Required Part Arm

,

or

Press Yes (or press Chime to arm silently)

or

To Arm Individual Areas

Enter a valid User code

Press Area

Select Required Area using keys 1 - 8

-

Press Yes (or press Chime to arm silently)

or

To Disarm the System
Enter a valid User code

Press Yes (if the entry mode was not started)

To Cancel the Exit Mode
Enter a valid User code

Press Yes

To Clear an Arm Fail

Enter a valid User code

Press Reset

To Silence an Alarm
Enter a valid User code

To Reset After an Alarm

Enter a valid User code

Press Reset

To Engineer Reset

Contact Your Installation Company
To Anti-code Reset

Enter a valid User code

Press Reset

Contact Your Alarm Receiving Centre
Quote 4-digit code shown on display


Enter 4-digit code given by Receiving Centre

Press Yes

To Omit Zones

Enter a valid User code

Press Omit

Enter Zone Number(s)
…
Press Omit to toggle omit status on/off

Press Menu when finished

Press Yes to Arm

Turn Chime On/Off

Press Chime Once to Turn ON

Press Chime Again to Turn OFF

To Change User Code

Enter a valid User code

Press Menu followed by Yes

Press 2 followed by Yes

Enter a new 4, 5 or 6 digit User code

Press Yes to accept

Press Reset to return to the normal display

BUTTONS
1. To turn on press and hold for 4 secs
2. To Arm press
3. To Part Arm press
4. To Disarm press
5. To activate Panic Alarm press and
hold together for 4 secs
6. To turn off press and hold for 4 secs
7. The SmartKey™ will power off after 20
secs of no activity
ALARM STATUS LED's
Green LED on = Disarmed
Orange LED flashing = Part Arming
Orange LED on = Part Armed
Red LED Flashing = Arming
RED LED on = Armed
All 3 LED's flashing together = Alarm
All 3 LED's cycling = Panic Alarm
STATUS LED
Green LED on = Connection
Red LED on = No connection
© TEXECOM LTD. 2012

Texecom Premier Elite Series Specifications

General

Event Log	1000 events
Expanders	Supports up to 8 expanders
Wired Zones	Up to 48 wired zones
Wireless Zones	Up to 64 wireless zones
Batteries	12V 7Ah
Tamper Protection	Yes
Outputs	Up to 8 outputs
Battery Backup	Yes
Compatibility	Compatible with Texecom accessories
Dimensions	Varies depending on model
Weight	Varies depending on model