Texecom Veritas R8Plus - Changing Access Levels

Programming Access Codes Master User Guide
6 INS140-2
From the Unset State:
1) Enter your Access code
''''
2) Press PROG to access the Programming Menu
.
3) Enter 69 to select the View Your User Number option
&0
4) The zone light corresponding to your User Number will illuminate
5) Press RESET, the system will return to the Programming Menu
/
6) Press RESET to revert to the unset state
/
Changing Access Levels
+!
–
+,
Each Access Level has an associated Number (1 – 8) as follows:
Access Level
Access Level
Number
Access
Type
Can be Programmed
by
User
!
Customer Master
$#"!
Engineer
"
Installer Boss
''''
PA (Panic)
#
Customer Master
$#"!
Duress
$
Customer Master
$#"!
Master User
%
Customer Master
$#"!
Cleaner
&
Customer Master
$#"!
Null
+
Customer
Installer
Master
$#"!
Boss
''''
Boss Engineer
,
Installer Boss
''''
The Master User can only assign Customer Access Types and the
Boss Engineer can only assign Installer Access Type.
From the Unset State:
1) Enter your Access code (Master User or Boss Engineer only)
''''
2) Press PROG to access the Programming Menu
.
3) Enter 7 to select the Change Access Level option
+
4) Enter the User Number (1 - 8) you wish to change, e.g. 5
%
5) Enter their new Access Level (1 - 8) e.g. 4 = Duress
$
6) Press PROG, the system will chime to confirm the new Access Level
.
7) Press RESET to revert to the unset state
/
!