Master User Guide Programming Access Codes
INS140-2 7
Displaying Your Access Level
+0
Every user may view their own Access Level
From the Unset State:
1) Enter your Access code
''''
2) Press PROG to access the Programming Menu
.
3) Enter 79 to select the View Your Access Level option
+0
4) The zone light corresponding to your Access Level will illuminate
5) Press RESET, the system will return to the Programming Menu
/
6) Press RESET to revert to the unset state
/
For security reasons the Duress Access Level will be displayed as
the User Access Level.
Notes www.scorpion-group.co.uk
To Next Page
Loading...
