Texi Joy 13 User Manual

Texi Joy 1368
EN
SAFETY STITCH (K) - used for blind hemming in dresses, trouser leg -this stitch
will sew without stitches showing on right side of fabric. Remember to match
colour of the thread to sewing material.
BOX STITCHING (l) - Use this stitch to join heavy weight interlining. Overlap two
raw edges together and use this stitch to join them.
SCALLOP STITCH (F,G,H,I) - these stitches are used to sew a
decorative edge on garments and table cloths.
THREE POINT ZIGZAG (J) - used as standard zigzag, but for dicult elastic
materials. Because of three point stitch will stretch with working material.
BUTTONHOLE SEWING
1. Mark position and length of buttonhole on fabric.
2. Insert buttonhole foot and adjust fabric that point C on
the foot will be match to point B on the fabric.
3. Choose
(left side of the buttonhole) on the dial. Lower
the needle and start to sew till the pint A. Stop to sew
and raise the needle to its highest position by turning the
hand wheel.
4. Choose
on the dial and make 4-6 stitches. Stop to sew
and raise the needle to its highest position by turning the
hand wheel.
5. Choose (left side of the buttonhole) on the dial. Lower
the needle and start to sew till the pint A. Stop to sew
and raise the needle to its highest position by turning the
hand wheel.
6. Choose on the dial and make 4-6 stitches. Stop to sew
and raise the needle to its highest position by turning the
hand wheel.
7. After nish take out the fabric and cut the hole inside the
buttonhole using seam ripper.
Texi Joy 13 instrukcja 2017 + PT.indd 68Texi Joy 13 instrukcja 2017 + PT.indd 68 18.09.2020 11:3118.09.2020 11:31

Texi Joy 13 Specifications

General

Brand	Texi
Model	Joy 13
Category	Sewing Machine
Language	English