Texi Joy 13 - MACHINE MAINTENANCE; Cleaning the Hook Assembly

Texi Joy 1370
EN
MAINTANANCE
CLEANNING AND REMOVING THE HOOK
CAUTION: Unplug the power supply before making below acitivies.
Raise the needle to its highest position and open the hook cover. Open thehinged
latch of bobbin case and take it out of the machine.
1. Bobbin case
2. Latch
3. Open the hook race ring holders and remove the hook race ring.
4. Hook
5. Bobbin case base
6. Bottom pin
7. 7. Socket for bottom pin
Clean the hook race with a brush and soft dry cloth. From time to time use a little bit
oil.
Texi Joy 13 instrukcja 2017 + PT.indd 70Texi Joy 13 instrukcja 2017 + PT.indd 70 18.09.2020 11:3118.09.2020 11:31