Fig. 9 Cable Joint for Under Water Application
Procedure for joining and insulating the
3 core conductors
Proedure for joining and insulating the
cable joint for under-water cable
Step 1: Soldering / knot the copper strands Step 6: Layer 1 - 1st layer of virgin rubber insulation
Step 7: Layer 2 - 1st layer of PVC insulation tape
Step 8: Layer 3 - 2nd layer of PVC insulation tape
Step 2: Layer 1 - 1st layer of virgin rubber insulation
Step 3: Layer 2 - 1st layer of PVC insulation tape
Step 4: Layer 3 - 2nd layer of virgin rubber insulation
Step 5: Layer 4 - 2nd layer of PVC insulation tape
OMOW002A 19 2020.01
To Next Page
Loading...
