Texmo Industries Taro Pumps TSSM Series - SVSM Horizontal Mounting; Motor and Pump Stand Assembly; Fig. 7 Motor Stand Assembly Guide; Fig. 8 Pump Stand Assembly Guide

Remove the screws in the clamps (a) and insert Motor Stand in the motor base flange (b) as shown in below
pictures and tight the screws (c).
Fig. 7 Assembly procedure – Motor stand
Similarly assemble the pump stand in the delivery flange as shown in pictures (d), (e) and (f) and tighten the
screws.
Fig. 8 Assembly procedure – Pump stand
Both Motor & Pump Stands should be assembled opposite to the cable side
Motor and pump stand assembly – procedure
Refer Fig. 7 and Fig. 8 for the assembling the motor stand and pump stand.
SVSM – Horizontal Mounting:
(a) (c)(b)
(d) (f)(e)
OMOW002A 17 20 20.01