EasyManua.ls Logo

Texmo Industries Taro Single Phase Domestic Monoblock - Installation Safety and Precautions; Handling, Power Supply, and Earthing Safety; Environmental and Operational Safety

Texmo Industries Taro Single Phase Domestic Monoblock
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note
If you detect damage or discrepancy in the product, contact the dealer from
whom the pump was purchased
Warning
Do not use this pump for oil, toxic, corrosive and flammable liquids. Pumping
ammable liquids could cause explosion
Caution
Ensure suitable precautions are taken while lifting and lowering the product
Caution
Use trained professionals to install the Single Phase Self-Priming Monoblock
Warning
Use a power supply cable that has sufficient rating. Factor in low-voltage
operation
Warning
Provide proper Earthing. Improper Earthing can cause electrical shock
Caution
Use a Megger to verify the insulation resistance of the motor. Insulation
resistance should be 20MΩ minimum
Caution
Do not place the Single Phase Self-Priming Monoblock in a location subject to
flooding as water can enter the motor and damage the windings and bearings
Warning
Mount the pump with its axis horizontal
OMMM001A 14 2020.01

Related product manuals