Text Alert Wireless Alert - User Manual

Manual
a product
Document Version: V4.8
Apologies to Apple Mac users – TextAlert drivers and software only currently available for Windows/PC
Applicable to firmware package versions 4.8 and up
Before attempting to connect or operate TextAlert, please read these instructions thoroughly.
Pay close attention to the guarantee conditions.

Summary

Product Specifications

General, Electrical, Connectors, and RF Parameters

Details dimensions, operating conditions, power, battery, connectors, and RF parameters.

Introduction to TextAlert

System Overview and Functionality

Explains what TextAlert does, its purpose, and how it works with sensors.

Detection Sensor Options

Describes the types of sensors compatible with TextAlert, including VoiceAlert PIR and other RF sensors.

LED Status Indicators and Audio Notifications

Explains the meaning of LED lights and audible pulses for system status.

Installation Guide

Required Components and SIM Card Setup

Lists necessary items like SIM card, sensors, and power supply.

Antenna Installation and Placement

Guides on installing the GSM and 433MHz antennas for optimal reception.

TextAlert Software Installation

Running the Installer and Initial Setup

Covers launching the setup, welcome screen, and directory selection.

Driver Installation and System Integration

Details the process of installing USB drivers and integrating the hardware with the PC.

Hardware Wizard and Finalization

Explains the Found New Hardware Wizard steps and completing the installation.

System Configuration and Setup

Admin Setup and Disclaimer Acceptance

Covers the initial disclaimer and setting up the administrator details.

Recipient and Zone Configuration

Details adding recipients, phone numbers, and configuring zones.

Saving and Managing Configuration Files

Explains how to save settings to the device or to a file for later use.

Zone Management

Eliminating False Alarms

Describes methods to prevent false triggers using sensor logic and timing.

Zone Triggering Modes and Options

Covers single sensor, dual sensor, multi-trigger, and armed-at-startup configurations.

Assigning Recipients and Notifications per Zone

Links specific recipients to zones and defines notification preferences.

SIM Card Airtime Management

Guides on checking and managing pre-paid SIM card airtime.

Remote Control Functions

Remote Setup and Button Assignment

Explains how to configure remote buttons for various actions like Arm, Disarm, Panic.

Zone Toggling and Pausing Features

Details how to use remote buttons for toggling zone states or pausing the system.

Advanced Options and Inputs;Outputs

Managing Output Behavior

Configures how external devices (sirens, lights) respond to triggers.

Managing Input Behavior

Sets up how external inputs (alarms, switches) affect TextAlert functions.

Guarantee and Support

Product Guarantee Terms and Conditions

Outlines the warranty period, conditions, and exclusions for TextAlert.

Copyright Notice and Manufacturer Contact

Provides legal notices and contact details for Cross Point Industries, Inc.

Troubleshooting Common Issues

Hardware Detection and Driver Errors

Steps to resolve "Hardware not detected" errors and verify driver installation.

SMS Sending and Reception Problems

Addresses issues related to airtime, signal reception, and system configuration affecting SMS delivery.

Text Alert Wireless Alert Specifications

General

Type	Wireless Alert Receiver
Power Source	AC Adapter (included) or 4 x AA Batteries (not included)
Alert Type	Audible alarm and visual LED
Battery Life	Up to 1 year
Wireless Range	Up to 1000 ft (open air)
Range	Up to 1000 ft (open air)