Textron Bunton BZT 2200D Series - Hydrogear Pump

41
BZT
2200D
Series
FIGURE 8
HYDROGEAR PUMP
2722087-08
2721615 PUMP-HYDRO RH ILLUSTRATED AS SHOWN EXCEPT GROUP A IS ROTATED 180°
AROUND THE CENTERLINE OF THE PUMP.
8-1 70516 ----- HOUSING KIT 1
8-2 70517 ----- END CAP KIT 1
8-3 50641 ----- STRAIGHT HEADLESS PIN 2
8-4 50969 2721615-01 FLANGE BOLT M8-1.25 X 60 4
8-5 51232 2721615-02 HOUSING O-RING 1
8-6 2513027 38345-06 CHARGE PUMP KIT 1
8-7 50273 38345-07 STD GEROTOR ASSEMBLY 1
8-8 9004101-1340 38345-08 O-RING 1
8-10 50095 38345-10 SOCKET SCREW M6-1.0 X 20 2
8-15 2513030 ----- BYPASS VALVE KIT (BLANK) 1
8-18 70521 2721615-07 PUMP SHAFT KIT 1
8-19 50315 ----- BALL BEARING 17 X 40 X 12 1
8-20 51161 ----- LIP SEAL 17 x 40 x 12 1
8-21 50951 ----- SPACER 1
8-22 50329 ----- RETAINING RING 1
8-25 70331 38345-12 CYLINDER BLOCK KIT 1
8-29 2003014 ----- BLOCK SPRING 1
8-30 2003017 ----- BLOCK THRUST WASHER 1
8-31 51246 2721615-09 VALVE PLATE 1
8-32 2003087 188059-11 SWASH PLATE 1
8-34 50551 2721615-11 BALL THRUST BEARING 1
8-37 2003005 188059-15 ARM-TRUNNION 1
8-38 2000015 2721615-13 SLOT GUIDE 1
8-42A 2510027 2721615-14 CHECK VALVE KIT (.031") 1
8-42B 2510050 2721615-15 CHECK VALVE KIT (BLANK) 1
8-44 70403 2721615-16 CHARGE RELIEF VALVE KIT 1
8-49 2513043 2721615-17 TRUNNION SEAL/RETAINER KIT1
8-56 9005110-4400 ----- STRAIGHT THREAD PLUG 1
8-66 9005110-3100 ----- 5/16 SAE PLUG 1
8-100 70525 2721615-18 OVERHAUL SEAL KIT 1
ITEM HYDROGEAR PART NO. TEXTRON PART NO. DESCRIPTION QTY