Page 26
Owner’s Manual and Service Guide
GENERAL SPECIFICATIONS
JACOBSEN 3500
STANDARD EQUIPMENT:
CHASSIS Welded Tubular Steel; Powder Coated (DuraShield™)
BODY (Front) Flexible, Impact Resistant DuraShield™ Injection Molded TPE
(Thermoplastic Elastomer) with Base Coat/Clear Coat
BODY (Rear) Lightweight, replaceable steel panels
BATTERY One 12 Volt Maintenance Free (360 CCA, 51 Minute Reserve)
ENGINE 11 hp (8.2 kW) 21 ci (350 cc) Twin Cylinder, Air Cooled,
Overhead Cam, Overhead Valve
Pressurized Lubrication with Washable, Permanent Oil Filter
Internal Balance Shaft
Solid State Ignition with RPM Limiter
Replaceable Dry Cartridge Air Filter & Remote Intake
Fixed Jet Bowl Carburetor, Pulse Fuel Pump
TRANSAXLE 13.32:1 Helical geared with Neutral Lock and Ground Speed Governor
TRANSMISSION Automatic Continuously Variable Transmission (CVT)
FUEL TANK 6 Gal (23 L) Tank. 36 lbs. (16 kg) Fuel Weight
BRAKES Dual Rear Wheel, Self-Adjusting Mechanical Drum Brakes
PARKING BRAKE Automatic Parking Brake Release with Self-Compensating System
FRONT SUSPENSION Leaf Springs with Hydraulic Shock Absorbers
REAR SUSPENSION Leaf Springs with Hydraulic Shock Absorbers
STEERING Single Reduction Rack & Pinion
STEERING WHEEL Dual Handgrips, Pencil Holder & Clipboard
SEATING Cushion Foam/Vinyl Cover, Hip Restraint/Hand Hold
SEATING CAPACITY Operator & 1 Passengers
TOTAL LOAD CAPACITY 800 lbs (360 kg) Including Operator, Passenger, Accessories & Cargo
SPEED 12 - 14 mph (19 - 23 kph)
STANDARD COLORS Jacobsen Orange
DASH PANEL Scuff Resistant Glass Fiber Reinforced Plastic
(Thermoplastic Olefin) with 4 Drink Holders
LIGHTING/HORN Dual Halogen, Horn
TIRE Stryker 1
®
22 x 9 - 10 (Uni-directional)
TIRE PRESSURE 12 - 16 psi (85 - 110 kpa)
WEIGHT (Without fuel) 1050 lbs (475 kg)
BED Rotomolded Load Bed
OPERATING CONTROLS &
INSTRUMENTATION Removable Key, ‘Deadman’ Accelerator Control, Direction
Selector, Audible Reverse Warning, Electric Fuel Gauge
Specifications subject to change without notice.
To Next Page
Loading...
Need help?
General
