3
Installation Instructions
Before Installation
• After removing packing, make sure that the gas appliance and accessories are not damaged. In
case of doubt, do not install the appliance. Contact Towngas Company for replacement.
• Keep all the packing (e.g. plastic bags, cardboard, staples) away from children to avoid danger.
• Do not store any flammable materials, sprays or pressurized containers inside the cabinet below
the gas appliance.
• Place the gas appliance on a stable and level bench top. Please refer to below figure for cut-out
dimensions and position.
• If another apparatus (e.g. dishwasher, washer) is installed under the gas appliance, keep a
clearance of at least 10mm from the bottom of the gas appliance. If the installation instruction of
the apparatus underneath requires a different distance, adopt the larger value.
• If an air-flow generating apparatus (such as built-in oven, clothes dryer) is installed under the gas
appliance, a partition must be added and sealed with silicon gel. This prevents air-flow affecting
the gas appliance operation.
Bench Top Cut-out Dimensions
To Next Page
