7
Operation Instructions
Flame Control
After ignition, turn the control knob to adjust flame power according to cooking need.
Turning off Flame
Turn the control knob to the off position“ ● ”, the flame will be turned off.
Attention: Pop sound may be generated when turning off flame
due to the instant combustion of gas remained in burner. This is a
normal phenomenon.
Ignition of Burner
Ensure the control knob is at the off position “ ● ”Press and turn
the knob in anti-clockwise direction to ignition position. Sparks are
maintained for around 10 seconds for ignition. After releasing the
knob, make sure the flame persists.
Attention: If the appliance has not been used for a long time,
the first ignition may not succeed due to trapped air in gas
pipe. Turn the control knob to the off position“ ● ”. Repeat
the above ignition procedures until success of ignition.
Off position
爐火控制旋鈕
爐火情況
Maximum Medium
Medium
Minimum
Knob Position
Flame Condition
Ignition
position
Off position
●
To Next Page
