To Next PageTo Next Page
Need help?Do you have a question about the Thane Fitness Orbitrek X2 and is the answer not in the manual?
General| Type | Elliptical Trainer |
|---|---|
| Resistance Levels | 8 |
| Display | LCD |
| Weight Capacity | 100 kg |
| Weight | 85 lbs |
| Resistance | Magnetic |
| Heart Rate Monitoring | Yes |
| Programs | 12 |
| Drive System | Front |
Attaches the front stabilizer to the main frame using hex socket bolts.
Attaches the rear stabilizer to the main frame using carriage bolts and nuts.
Installs the left hinge bolt, spring washer, hex nut, and lock nut onto the left crank.
Installs the right hinge bolt, spring washer, hex nut, and lock nut onto the right crank.
Mounts the spindle bar between the connecting tubes with washers and screws.
Configures the unit for stepper mode by adjusting slider pins and key.
Inserts and locks the key into the pedal tubes for mode engagement.
Connects the pedal tubes to the connecting tubes using bolts and nuts.
Attaches the pedals to their respective pedal tubes using screws and washers.
Mounts handlebars into connecting tubes and secures them with locking knobs.
Connects the sensor wire and installs the computer unit onto the frame.
Diagram showing all parts of the machine for identification.
Detailed list of all components with part numbers and specifications.
Details the parameters tracked by the exercise computer.
Explains the function of the MODE and SELECT keys.
Describes how to use the computer's auto-on/off and auto-scan features.
Details the displayed information such as TIME, CALORIES, SPEED, DISTANCE, COUNTS.
Instructions on how to reset the computer and battery information.
