EasyManua.ls Logo

The Land of Nod Jenny Lind Crib User Manual

The Land of Nod Jenny Lind Crib
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
- Failure to follow these warnings and assembly instructions could result in serious injury or death.
- Read all instructions before assembling crib. Keep instructions for future use.
-Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding
under an infant.
-To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
Strangulation Hazard:
- Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child’s neck,
such as hood strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to
toys for any reason.
-To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose
fasteners.
- DO NOT place crib or toddler bed near windows where cords from blinds or drapes may strangle a child.
Fall Hazard:
- When child is able to pull to standing position, set mattress to lowest position and remove bumper pads,
large toys and other objects that could serve as steps for climbing out.
-When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used
and the child should be placed in a youth or regular bed.
CAUTION: ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27-1/4 INCHES (69 cm) BY 51-5/8
INCHES (131 cm) WITH A THICKNESS NOT EXCEEDING
6 INCHES (15 cm).
- Check this product for damaged hardware, loose joints, missing pats or sharp edges before and after
assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any
parts are missing, damaged, or broken. Contact The Land of Nod® for replacement parts and instructional
literature if needed. DO NOT substitute parts.
- If refinishing, use a non-toxic finish specified for children’s products.
- Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
- Infants can suffocate in gaps between crib sides and a mattress that is too small.
- Periodically check to see that all bolts are securely tightened.
- To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water
using a soft cloth, and dry thoroughly.
- Follow warnings on all products in a crib.
- When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood
furniture.
WARNING:
!
!
WARNING:
!
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: customerservice@landofnod.com • www.landofnod.com
Jenny Lind Crib Assembly Instructions
Made in Vietnam - r08
Question and Answer IconNeed help?

Do you have a question about the The Land of Nod Jenny Lind Crib and is the answer not in the manual?

The Land of Nod Jenny Lind Crib Specifications

General IconGeneral
BrandThe Land of Nod
ModelJenny Lind Crib
CategoryIndoor Furnishing
LanguageEnglish

Summary

Crib Safety Warnings and Precautions

Strangulation and Fall Hazard Details

Details risks of strangulation from strings and falls due to climbing hazards.

Mattress Size and Padding Safety

Specifies mattress dimensions and cautions against soft bedding to prevent suffocation.

Product Components and Hardware List

Small Parts Choking Hazard Warning

Warning about small parts present in the unassembled state, requiring adult assembly.

Crib Assembly Steps

Step 1: Attach Cam Screws to End Panels

Insert cam screws into end panels and secure with a screwdriver.

Step 2: Connect Side Panels to End Panels

Connect side panels to end panels using barrel cams, bolts, washers, and brackets.

Step 3: Attach Barrel Cams and Bolts

Continue connecting side panels to end panels with barrel cams, set screws, bolts, washers, and brackets.

Step 4: Connect Remaining Side Panels

Repeat connection process for the remaining side panels using barrel cams, set screws, bolts, washers, and brackets.

Step 5: Install Corner Supports

Determine desired mattress height and insert corner supports into the crib assembly.

Step 6: Attach Mattress Support Panel

Place mattress support panel onto corner supports and secure with bolt caps.

Product Care, Maintenance, and Storage

Cleaning Instructions

Clean surfaces with a soft cloth and mild cleanser, avoiding abrasive materials.

Maintenance and Storage Guidelines

Periodically check hardware, and store crib in a cool, dry place for long-term preservation.

Related product manuals