Watch a video of the SolidFlo™ G2 Pump installation
online @ www.thepondguy.com/solidog2
INSTALLING YOUR SOLIDFLO
™
G2 PUMP:
For Best Results
• SolidFlo™ G2 Pump should be placed on
a at surface away from sludge or
algae mats.
• Keep SolidFlo™ G2 Pump pre-lter free
of debris.
• Always cut step down tting to the largest
connection that will work with your tubing
size to maximize water ow.
• Run the SolidFlo™ G2 Pump 24 hours a day.
• DO NOT operate during freezing
conditions. Drain the SolidFlo™ G2 Pump
and store in a protected area.
Tools Required:
Kink Free Tubing
• Hacksaw
• Flathead Screwdriver or
Nut Driver
Flexible PVC Tubing
• PVC Glue
• Primer
Step 1
Attach the Step Down Fitting
Kink Free Tubing: Attach the step down tting to
the outlet of the SolidFlo™ G2 Pump. Note: The o-ring
should be between the SolidFlo™ G2 Pump housing
and the step down tting to create a watertight seal
when secured.
Flexible PVC Tubing: Attach the 1½” PVC tting and
skip to Step 3.
TECHNICAL SPECS CON’T :
15425 Chets Way | Armada, MI 48005
3
To Next Page
Loading...
