The Renovator Transforma 24 - Two Using the Transforma Ladder

6
SAFETY PRECAUTION:
CHECK THE CONDITION OF THE
LADDER UPON RECEIPT AND
BEFORE EACH USE. NEVER USE
A BROKEN OR DAMAGED LADDER.
PART TWO.
Using the Transforma Ladder System
The Transforma Ladder System has
two mechanical components:
A. The adjustable hinge found at the top of the
ladder when it is in the storage position, allows
 youtorotatethelegsandreconguretheladder.
This hinge rotates and locks into these three
positions. (See Figures A-1, A-2, and A-3).
1. Unlock the hinges by pushing both Palm
Buttons straight in until they stay in the open
position. (See Figures A-4 and A-5).
a. NOTE - Any pressure on the hinge
lock pins may make it
  difculttounlockthehinge.
Relieve the pressure by
simply jiggling one half of
the ladder back and forth
until the hinge lock pins can
move freely.
b. NOTE - DO NOT USE TOOLS TO
FORCE THE HINGE LOCK in or
out as this will cause permanent
damage to the hinge mechanism.
When the holes are aligned correctly
it should only take light pressure to
unlock the hinges.
Figure A-1
(Storage Position)
Figure A-2
(A-Frame Position)
Figure A-3
(Extended Position)
Figure A-4
Figure A-5
Hinge
Lock
Pins