10
F. Scaffolding Trestle Instructions
1. Pull the entire inner ladder assembly out
of the outer ladder railings and set them
down side by side (See Figure F-1).
4. Hold the two outer ladder bases so
their rungs face outwards and spread
the footings apart to form an A-frame
position. (See Figure F-4).
3. Gather both of the outer ladder railings
together.
(See Figure F-3).
2. Open the inner ladder assembly until the
hinges lock into the A-frame position.
This is one half of the trestles needed for
the scaffolding facility (See Figure F-2).
Figure F-1
Figure F-2
Figure F-3
Figure F-4
Ladder
Railings
To Next Page
Loading...
