— E4 —
Assembly
u
w
Split type assembly
1
Insert the Mic stand into the Base
and tighten it.
2
Untighten cradle pole cap, pull up
on the cradle pole. Retighten cap
to keep in place.
3
Insert Cradle with Mic holders
then rotate clockwise to tighten
the cradle onto the mic stand.
4
Untighten height adjustment cap
to adjust to a suitable height.
Retighten cap to hold in place
5
Its recommended to have the main
unit within 30 feet/10 meters
from the mic stand to serve as a
speaker.
Note: Always remember to put the rubber
cover back in place.
v
x
Cradle pole
adjustment cap
Height
adjustment cap
Extendable Mic
Stand
Cradle pole
v
To Next Page
Loading...
