CUEMASTER II OPERATION 77
READING LIVE CHANNEL AND DIMMER LEVELS
READING A CHANNEL LEVEL
You can find the playback level of any particular channel, for example Channel 12:
1 Ensure the Channel display is clear: press [CL] if necessary.
2 Press [CH] [1] [2] [AT]. The Level display will show the current level of Channel 12.
READING ALL LIVE CHANNEL LEVELS
You can find the playback levels of all live channels as follows:
1 Ensure the Channel display is clear: press [CL] if necessary.
2 Press [CH] [AT]. The Channel display will show the first channel up, and its current level.
3 Press [AT] again. The Channel display will show the next channel up, and its current level.
4 Press [AT] again to show all live channels in order.
At the end of the list both displays are blanked out. If you want a continuous read-out of a fading channel level, keep your finger on the
AT key.
READING A DIMMER LEVELS
You can find the playback level of any particular dimmer, for example Dimmer 12:
1 Ensure the Channel display is clear: press [CL] if necessary.
2 Press [DM], then [1] [2], then [AT]. The Level display will show the current level of Dimmer 12
READING LIVE DIMMER LEVELS
You can find the current levels of all live dimmers as follows:
1 Ensure the Channel display is clear: press [CL] if necessary.
2 Press [DM] [AT]. The Dimmer display will show the first dimmer up, and its current level.
3 Press [AT] again to show all live dimmers in order.
At the end of the list both displays are blanked out If you want a continuous level read-out, keep your finger on the AT key.
§ Note that if a dimmer number is entered when a channel number is in the Channel display, all levels shown will refer to patch listings,
NOT the live dimmer levels.
To Next Page
Loading...