Local Data backup
Item Description
Import This is associated with external devices which are added to the system such as USB disk. You can select a
folder from an external device and import it to the NAS as a share folder.
Copy Copy folder to folder or NAS folder to external device or external device to NAS folder. This backup is within
folder level.
Realtime Backup The task will be executed on the fly between the source and the target. In other word, any changes made
at the source will sync to the destination immediately.
Schedule Backup The task will be executed on schedule between the source and the target.
Import: click on “Import” and a screen will appear as below. 1.
If there is an external device installed on system such as USB disk, then it will be listed in the
Source pane.
Click on the associated external device and the contain folders will be listed. Select the folders that
are going to be imported to the NAS and select the available RAID volume which is listed in Target
pane.
In here, we have selected the “Intel Graphi…” and “N10850” folders from the external device and
imported them to the NAS under the RAID60volume.
To Next Page
Loading...
Need help?
General
