Thecus N2310 series User Manual

58
Chapter 3: System Administration
Next, please select the path from the drop down list to save the log. Also, give the access permission
whether these selected folders will be “Public” or not after the import.
Read the notes and check the “Accept” box for confi rmation. If a share name already exists for the im-s and check the “Accept” box for confi rmation. If a share name already exists for the im- and check the “Accept” box for confi rmation. If a share name already exists for the im-the “Accept” box for confi rmation. If a share name already exists for the im- “Accept” box for confi rmation. If a share name already exists for the im-“Accept” box for confi rmation. If a share name already exists for the im-Accept” box for confi rmation. If a share name already exists for the im-” box for confi rmation. If a share name already exists for the im-for confirmation. If a share name already exists for the im-a share name already exists for the im-
port, then the import will be rename automatically to “existing share name -1”.
For esample, if the NAS RAID volume “RAID60” already has a folder named “Intel_Graphics_
V614105398_XP”, the import folder will then be rename to: “Intel_Graphics_V614105398_XP-1”.

Thecus N2310 series Specifications

General

Memory	512MB DDR3
RAID Support	RAID 0, 1, JBOD
Drive Bays	2 x 3.5" SATA HDD
Network Interface	1 x Gigabit Ethernet
USB Ports	2 x USB 3.0
Network Protocols	CIFS/SMB, AFP, NFS, FTP, HTTP
Power Consumption	5W (Standby)
Operating System	ThecusOS