To connect the 1U4200XXX/1U4600 to your network, follow the steps below:
1. Connect an Ethernet cable from your network to the WAN/LAN1 port on the
back panel of the 1U4200XXX/1U4600.
2. Connect the provided power cord into the universal power socket on the back
panel. Plug the other end of the cord into a surge protected socket. Press the
power supply switch to turn on the power supply.
3. Press the power button on the front panel to boot up the
1U4200XXX/1U4600.
NOTE
If you are installing the 1U4200XXXR/1U4600R, be sure to
connect both power cables. If you do not, the system will
assume one power supply has failed, and an alarm will sound.
To Next Page
Loading...
Need help?
General
