Other than the defined items sent upon registration, there are also two additional
items: “HDD Info” and “Time Zone”. These two optional items can also be sent to
Thecus anonymously for analysis and statistics purposes. To send these items,
simply check the desired checkboxes to help Thecus improve its products and
services.
Syslog Management
Generates system log messages for the syslog server.
These messages are stored on your NAS in: Nsync > log> messages.
Information can be obtained in two ways: locally and remotely.
Local Access - When Local is selected, log messages can be viewed directly
through samba. However, to access the Nsync folder through samba, the folder
must be set as browseable and the user must be given ACL permissions. In OS X,
UNIX extensions must be disabled under Network Service > Samba/CIFS in the UI.
Remote Access - They can also be viewed remotely by selecting Remote and
inputting a Remote IP Address into the input field. This will allow a TFTP program,
such as TFTPd32, to access the system log remotely from a computer.
To Next Page
Loading...
Need help?
General
