Thecus N3200 User Manual

37
To connect N8200XXX/N8800 series NAS to your network, follow the steps below:
1. Connect an Ethernet cable from your network to the WAN/LAN1 port on the
back panel of the N8200XXX/N8800.
2. Connect the provided power cord into the universal power socket on the back
panel. Plug the other end of the cord into a surge protected socket. Press the
power supply switch to turn on the power supply.
3. Press the power button on the front panel to boot up the N8200XXX/N8800.

Thecus N3200 Specifications

General

Brand	Thecus
Model	N3200
Category	Network Storage Server
Language	English