To Next Page

To Previous Page

Expanding a RAID

To expand a RAID 1, RAID 5, or RAID 6 volume, follow the steps below:

1. Replace one of the hard drives in the RAID volume and allow it to

automatically rebuild.

2. Once rebuilt, you can continue to replace any remaining disks in the RAID

array.

3. When you are done replacing hard drives, log on to Web Management.

Navigate to Storage> RAID to open the RAID Configuration screen.

4. On the RAID Information screen, and click Edit to open the RAID

Configuration screen.

5. On the RAID Configuration screen, click Expand.

WARNING

Remove RAID destroys all data in the current RAID volume. The data is

unrecoverable.

NOTE

RAID expansion did not support file system created by ZFS.

Thecus N3200 User Manual

Other manuals for Thecus N3200