5. iSCSI Backup: click on “iSCSI Backup” and screen appear as below.
It can be backup to two different storage pool, iSCSI to folder, iSCSI to external
device.
Let’s take example to have “iSCSI to Folder” backup, from existed iSCSI volume
“iSCSI_iscsiv502” to volume RAID folder “andy_local”.
The source pane listed “iSCSI_iscsiv502” and “iSCSI_iscsiv50” where are iscsi
volume has existed in this system with name “iSCSI_+iscsi target volume
name”.
Next, provide the task name and where the task log will store.
To Next Page
