Themis TS-500 - Decode Illumination and Decode Aiming Pattern

24
3-9 Decode illumination and decode aiming pattern
Decode illumination mode: Enable illumination causes the imager to turn on the illumination to aid
decoding. Disable illumination to turn off illumination for the imager during decoding. Better quality
images could be obtained with illumination support. The effectiveness of the illumination decreases as
the distance to the target increases.
Decode aiming pattern: When this option is enabled, the imager will project the aiming pattern during the
code capture.
Level of decode illumination: This parameter can be adjusted for different level of decode illumination.
Enable illumination in low light conditions: In low light conditions, the imager may not work well in
inducting barcodes automatically. In this case, you are advised to enable this function. Notes: This
function is only valid in auto-induction mode.