46
3-20 Codabar
Read:
Format
Start character Data digits (variable) Check digit (optional) End character
Check digit verification: The check digit is made as the sum module 16 of the numerical values of all data
digits.
Check digit transmission: By setting Enable, check digit will be transmitted.
Max./Min. code length: Refer to Max./Min. code length of 3-16 Code 39.
Code ID setting: Refer to Code ID setting of 3-11 UPC-A.
Insertion group selection: Refer to Insertion group selection of 3-11 UPC-A.
Start/End type: Codabar has four pairs of Start/End pattern; you may select one pair to match your
application.
Start/End transmission: Refer to Start/End transmission of Code 39.
Start/End character equality: By setting Enable, the start and end character of a Codabar barcode must
be the same.
Multiple-scan setting
Single-scan setting
Option barcode Option Alpha. entry
Read
Disable 00
Enable 01*
*
Check digit verification
Disable 00*
*
Enable 01
Check digit transmission
Disable 00*
*
Enable 01
Max. code length
00-99
00-99
00*
*
Min. code length
00-99
00-99
00*
*
To Next Page
Loading...
