POOL+ MANAGER App A2 - User Manual v1.0 11
5.
LIGHTS
In this menu setting, you can only change the colour of your allocated Pool and Spa
light/s. Garden lights are not given the option of colour changing.
The socket number and the brand/type of light must have been allocated in the
Installer Setup under Appliances (6.3) before you can change the colours through this
menu option.
When you enter the Lights menu the controller will display the allocated socket
number, allocated light type, and the brand/style of light. For example.
S6: POOL LIGHT
SINGLE COLOUR
The ↑ or ↓ buttons can be used to move between the allocated lights to the light you
wish to change. Once the Light is displayed on the screen, press Enter and the
controller will display:
S6: (Brand name)
(current colour)
Use the ↑ or ↓ buttons to toggle through the range of colours (if any) associated with
that brand of pool light. Press Enter to accept the colour you wish to choose.
If you so wish you can then move onto another allocated socket and change the colour
settings of that socket.
Adjust the colour as described above.
Note:
A maximum of 3 sockets can be allocated to lights, whether Pool, or Spa.
Each socket/group of lights will be the same colour as chosen for that allocated socket.
To Next Page
Loading...
