POOL+ MANAGER App A2 - User Manual v1.0 15
6.3
LIGHTS
In this menu option, you will be able to select which type and brand of Pool & Spa
lights that you have installed.
A maximum of 3 sockets can be allocated to lights, whether Pool, or Spa. Each
of the 3 sockets will run a Light Transformer. Each socket/group of lights will be
the same colour as chosen.
Before any pool or spa lights can be setup in this menu option, 1, 2, or 3 sockets
need to have been allocated in appliances to either the pool or spa light.
When you enter this menu option, the first socket that has been allocated will be
displayed along with the allocated appliance. The controller will display:
S2: SPA
SINGLE COLOUR
Use the ↑ or ↓ buttons to scroll through the allocated sockets, press Enter to change
the displayed socket.
After you press Enter, the cursor will be located on the second line. Use the ↑ or ↓
buttons to scroll through the allowable brands of lights.
The allowable brands and types are as follows:
AquaQuip
AquaQuip INS
Spa Electrics
Astral Pool
Single Colour (non-branded)
Press Enter to select the light brand installed.
The controller will now display: (For Example)
AQUAQUIP
PURE RED
Use the ↑ or ↓ buttons to scroll through the colours that are associated with the brand
of light.
Once the colour you want is displayed on the screen, press Enter to accept the colour.
If there is only one socket that is allocated to a light, the controller will return
you to the Installer Setup Menu.
If there is more than one socket allocated to a light, the controller will keep you
in this menu option. You can use the ↑ or ↓ buttons to scroll through the other
allocated sockets. Press Enter when another allocated socket is displayed in
order to change that sockets settings. Change the settings as above.
Once you have finished, either press the Back Button to return you to the
Installer Setup Menu or press the Menu Button to return the controller to
normal operations.
To Next Page
Loading...