Theralux POOL+ MANAGER A2 APP - Page 28

POOL+ MANAGER App A2 - User Manual v1.0 28
6.12
WIFI
CONTINUED
Press the Enter button to move onto the next option and the controller will display:
RESET WIFI YES
SETTINGS NO
IF NO, the controller will return you to the Installer Setup menu.
If YES, the controller will reset any existing Wifi settings, including network password.
When yes is selected the controller will display:
WIFI SETTINGS
RESET OK
The controller will then restart, displaying:
CONTROLLER
RESTARTING
and go into Wifi configuration mode after the reboot, the Wifi arrow will blink.
6.13
FACTORY
If you wish to re-set the controller and start over again (thereby losing your settings), it
is done in this menu option.
When you enter this menu option, the controller will display:
RETURN FACTORY
SETTINGS NO
If you DON’T want to reset the controller, press Enter and the controller will return you
to the Installer Setup menu.
If you DO want to reset the controller, use the ↑ or ↓ buttons to change the NO to a YES,
press the Enter button and the controller will reset itself to factory settings and return
you to the Installer Setup menu.
6.14
ABOUT
All Firmware and controller unique codes are displayed here
The APP CODE: can be typed into the app if no QR code is available.