Use only the recommended batteries. Always replace weak
or empty batteries with a new, complete set of batteries at
full capacity. Do not use batteries from different brands or
with different capacities. The batteries should be removed
from the unit if it has not been used for a long time.
Notes on cleaning
Separate the device from the power supply or remove the
batteries before cleaning.
Only use a dry cloth to clean the exterior of the device.
Do not use any cleaning fluid to avoid damaging the
electronics.
Hints and Tips
If the receiver does not connect to the transmitter, try
the following:
Press and hold the CHANNEL/SYNC button on the base
station and then press TX button on the transmitter.
Relocate the base station and/or the remote unit until
connection is found.
Signals from other electronic devices may cause
interference. Place the base station and receiver away
from these devices.
The transmitter may not function properly in extreme
temperatures due to battery power. Replace the batteries
or the unit will resume proper function in more moderate
weather.
If the base station is attached to a refrigerator or a metal
object by magnet, the transmission may be shorter.
Remove the base station from the refrigerator or the
metal object or place the base station and remote sensor
as close as possible.
-4-
-5-
EN EN
To Next Page
Loading...