EasyManua.ls Logo

THERMACUT EX-TRAFIRE 75SD - Routine Maintenance Schedule

THERMACUT EX-TRAFIRE 75SD
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EX-TRAFIRE
®
75SD
Operator Manual, Revision T-5 5-45
Routine maintenance
WARNING
ELECTRIC SHOCK CAN KILL
Disconnect mains power lead before servicing; Qualified technicians only
should perform any work that requires removal of the system cover Allow a
period (minimum 5 min�) for electrical discharge before handling internal parts�
MAINTENANCE
Every usage
Check the gas pressure�
Check the consumables�
Check the work clamp�
Ensure that consumables are
installed correctly and are not
worn�
Every week
Examine and check the torch retaining cap safety switch pins,
ensure that the LED3 safety indicator which indicates a loose
retaining cap is fully functional�
Every 3 months
Clean the dust from inside of
the power supply using clean
dry compressed air
Advisory note:
The dust can be harmful to
health!
Full examination of the torch,
check the torch trigger safety
mechanism, check for signs of
cracking in the torch body or
exposed wires�
Immediately replace the mains
power lead/plug if damaged�
Immediately replace the torch
lead if damaged�
Check air-line hose, filter
elements, and connections for
leaks�