EasyManuals Logo

Thermador UCV30 Care And Use Manual

Thermador UCV30
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
PAGE 6
CARE AND CLEANING
TROUBLESHOOTING GUIDE
Remove obstruction, press Snor-
kel Up/Down button to raise in-
take, then press again to lower
intake.
Reactivate the controls by press-
ing the Delay Shut Off button and
then the Blower Off button. Press
the Snorkel Up/Down button to
continue operation. If intake is
so low that control buttons are
not accessible, reset by unplug-
ging and plugging.
*If problem persists, leave intake
in the current position and con-
tact electrician or qualified appli-
ance service technician.
Contact qualified appliance service
technician.
Clean filters, then press and hold
the Clean Filter Reminder button
for three seconds to reset.
Obstruction
Intake encountered an obstruc-
tion on the way up & timed out.
Control button board has become
disconnected.
PROBLEM
POSSIBLE CAUSE
REMEDY
Intake Stopped
Nothing works - all buttons are
illuminated.
Nothing works - no buttons are
illuminated.
Clean Filter Reminder button illu-
minates
Aluminum
Mesh Filters
Painted
Top Cap for
Black/White
Anodized
Aluminum
Top Cap for
Stainless
Stainless
Steel
Filter Front
& Back Wall
Plastic
Up/Down
button and,
Controls
Top cap is not removable. Wash top and underside with hot sudsy water. Rinse and wipe dry or
apply Fantastic
®
or Formula 409
®
first to a clean sponge or paper towel and wipe clean. DO
NOT USE powdered cleansers or steel wool pads.
Clean filters in the dishwasher or by agitating in sudsy water. Ensure that there is no soil
trapped in the fine mesh. Dry the filters before reinstalling them.
Wipe with a moist soapy sponge. Rinse and dry.
DO NOT USE powdered cleansers or steel
wool pads.
Top cap is not removable. Wash top and underside with hot sudsy water. Rinse and wipe dry or
apply Fantastik
®
or Formula 409
®
first to a clean sponge or paper towel and wipe clean. DO
NOT USE powdered cleansers or steel wool pads.
Wipe grease accumulation with a paper towel or sponge. Scrape heavy buildup with a plastic
spatula. Clean with a soapy sponge; rinse and dry. Always wipe or rub with grain. Wipe with
Fantastik
®
or Formula 409
®
sprayed onto a paper towel. If grease buildup is heavy, several
applications may be necessary.
Polish with Stainless Steel Magic
®
and a soft cloth. Remove water spots with a cloth
dampened with white vinegar. Use Cameo Aluminum and Stainless Steel Cleanser
®
.

Other manuals for Thermador UCV30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Thermador UCV30 and is the answer not in the manual?

Thermador UCV30 Specifications

General IconGeneral
BrandThermador
ModelUCV30
CategoryVentilation Hood
LanguageEnglish

Related product manuals